An Electrician's Job – Installing Home Chandeliers

Chandeliers are found in various parts of the home today. They frequent formal and casual dining rooms, vaulted ceilings in main living areas, and even luxurious bathtubs in the master suite. But before they can make their showing, an electrician needs to come in and do some work. In fact, whether you are installing your first chandelier or replacing your old one, you need the expertise of an electrician. A few reasons why are detailed below.

Electricians Wire or Re-Wire Rooms

One of the main duties of an electrician is to wire homes for electricity. If you are putting your chandelier in an area that hasn't been wired for lights at all, the electrician has a lot of work to do so that your chandelier will work once installed. If, however, you have existing wiring, an electrician will still inspect the area to make sure the wiring meets current building codes before hooking up the chandelier. Electricians will also check for frayed or damaged wires and replace any that are wearing out. If you don't know much about electrical wires, it's best to leave chandelier installation to a professional instead of spending hours hooking it up only to find that you have a short somewhere and have to hire a professional anyway.

Electricians Ensure Adequate Capacity

The weight of a chandelier is substantially different from the weight of a standard light fixture. The fixture isn't dangling downwards and causing the ceiling to hold up its dead weight, for one. And its size is much smaller, for another thing. To ensure that the ceiling has adequate weight capacity for your chandelier, an electrician will check the:

  • Mounting Box: The mounting box is installed inside the ceiling and supports the weight of the light fixture. If you are replacing a standard fixture with a chandelier, your mounting box may need to be upgraded to something with a higher capacity. An electrician will most likely go through the attic to install a new mounting box before putting in a chandelier.
  • Junction Box: The junction box is where the electrical wiring for all the units in a room meets up. Sometimes the capacity for junction boxes is low and a new box with added room for wiring and capacity for electricity flow is necessary before a chandelier will function. This is also replaced by the electrician when necessary.
  • Ceiling Braces: Not only should your mounting box meet the capacity requirements of your new chandelier, but your ceiling braces should, as well. Although electricians don't make alterations to the construction of your home, they might be able to recommend a trusted contractor who can strengthen ceiling beams so your chandelier can be installed.

Electricians Provide Different Lighting Options

The final thing electricians can do when installing a chandelier is offer you lighting options. If you replace an old chandelier with a new one, you might not be as worried about weight capacity or the state of your wiring (if you know the wiring was done recently, for example). However, your lighting settings will remain unchanged, while you may have ideas for changing the mood in the room by altering its lighting. These are 2 lighting options you might consider hiring an electrician for:

  • 3-Way Lighting Switches: 3-way switches allow you to turn lights on and off at different access points in a room. Each entrance can have a light switch, or you can put one near the entrance and another near the sofa for convenience. You can even put one outside the room so you don't have to walk into a dark area before turning lights on.
  • Dimmable Lights: This option is similar to the 3-way lighting, but instead of 3 brightness settings, you can adjust the lights even more. They require a special switch that slides up and down to adjust brightness. Dimmable lights really affect the mood in a room – when they are barely on, the room has a soft, inviting feel to it, while brighter lighting can make the space seem larger.

Hiring an electrician is an important part of hanging a chandelier. An electrician will inspect the construction and electrical units before installing your new lighting. A professional will also give you more lighting options to suit your needs. Check out websites like http://www.advantageelectricians.com for more information.

Share